![]() ![]() You can calibrate your printer under Edit > Application Preferences > Printer Settings > Calibration. Printers are not 100% accurate and paper expands / contracts depending on temperature and humidity. In this example it is checked and needs to be unchecked (click the button to uncheck it): Make sure that the button to toggle the hairline mode is not checked.If the above does not solve the problem, please make sure that the hairline mode is not enabled for your drawing: Avoid line weight "Default" as this prints at minimum width and might not be visible. Select the layer which prints too fine, then choose Layer > Edit Layer and change the width to something thicker. Line widths are usually controlled through layer properties. If your print out is very light or fine (thin lines), you might want to adjust the widths of your entities. To export the drawing with the chosen layout to PDF, choose File > PDF Export. To print the drawing, choose File > Print. Step 3: Printing / PDF Export Printing on Paper If you have chosen to print to multiple pages, the pages are shown beside / below each other:.If the purple rectangle crosses your drawing, please check the glue margins in the drawing preferences. If your drawing is shown on a gray background, please check your paper and scaling settings again. Your drawing should be shown on a white paper as shown here:.To print in black / white or gray scale, click the appropriate icon in the options toolbar:. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |